.. _fsds_quickstart: GeoMesa FileSystem Quick Start ============================== This tutorial is the fastest and easiest way to get started with GeoMesa using the FileSytem data store (FSDS). The FSDS lets you store and query data without any database instance, using flat files. These files can be stored in HDFS, AWS, or even your local disk. It is a good stepping-stone on the path to the other tutorials, that present increasingly involved examples of how to use GeoMesa. About this Tutorial ------------------- In the spirit of keeping things simple, the code in this tutorial only does a few small things: 1. Establishes a new (static) SimpleFeatureType 2. Prepares the file system to store this type of data 3. Creates a few thousand example SimpleFeatures 4. Writes these SimpleFeatures to the file system 5. Queries for a given geographic rectangle, time range, and attribute filter, writing out the entries in the result set 6. Uses GeoServer to visualize the data (optional) Prerequisites ------------- Before you begin, you must have the following installed and configured: - `Java `__ JDK 1.8 - Apache `Maven `__ |maven_version| - a GitHub client Download and Build the Tutorial ------------------------------- Pick a reasonable directory on your machine, and run: .. code-block:: bash $ git clone https://github.com/geomesa/geomesa-tutorials.git $ cd geomesa-tutorials .. warning:: Make sure that you download or checkout the version of the tutorials project that corresponds to your GeoMesa version. See :ref:`tutorial_versions` for more details. To ensure that the quick start works with your environment, modify the ``pom.xml`` to set the appropriate versions for Hadoop, etc. For ease of use, the project builds a bundled artifact that contains all the required dependencies in a single JAR. To build, run: .. code-block:: bash $ mvn clean install -pl geomesa-tutorials-fsds/geomesa-tutorials-fsds-quickstart -am Running the Tutorial -------------------- On the command line, run: .. code-block:: bash $ java -cp geomesa-tutorials-fsds/geomesa-tutorials-fsds-quickstart/target/geomesa-tutorials-fsds-quickstart-$VERSION.jar \ org.geomesa.example.fsds.FileSystemQuickStart \ --fs.path /tmp/fsds/ \ --fs.encoding parquet The arguments above indicate: - ``fs.path`` the FSDS storage path. Each simple feature type will produce a sub-directory here. - ``fs.encoding`` the file storage encoding. The quick start comes pre-configured to use Apache's Parquet encoding. Once run, you should see the following output: .. code-block:: none Loading datastore Creating schema: GLOBALEVENTID:String,Actor1Name:String,Actor1CountryCode:String,Actor2Name:String,Actor2CountryCode:String,EventCode:String,NumMentions:Integer,NumSources:Integer,NumArticles:Integer,ActionGeo_Type:Integer,ActionGeo_FullName:String,ActionGeo_CountryCode:String,dtg:Date,geom:Point:srid=4326 Generating test data Writing test data Wrote 2356 features Running test queries Running query BBOX(geom, -120.0,30.0,-75.0,55.0) AND dtg DURING 2017-12-31T00:00:00+00:00/2018-01-02T00:00:00+00:00 01 719024913=719024913|||VICTORIA|AUS|173|2|1|2|4|Victoria Harbour, Ontario, Canada|CA|2018-01-01T00:00:00.000Z|POINT (-79.7667 44.75) 02 719024918=719024918|||EMPLOYER||020|10|1|10|3|Brooklyn, New York, United States|US|2018-01-01T00:00:00.000Z|POINT (-75.1704 42.3442) 03 719024923=719024923|||INDUSTRY||084|3|1|3|2|Pennsylvania, United States|US|2018-01-01T00:00:00.000Z|POINT (-77.264 40.5773) 04 719024924=719024924|||CORPORATION||115|2|1|2|4|Saskatoon, Saskatchewan, Canada|CA|2018-01-01T00:00:00.000Z|POINT (-106.667 52.1333) 05 719024925=719024925|||CORPORATION||172|2|1|2|4|Saskatoon, Saskatchewan, Canada|CA|2018-01-01T00:00:00.000Z|POINT (-106.667 52.1333) 06 719024927=719024927|||CANADIAN|CAN|100|24|2|14|4|Ottawa, Ontario, Canada|CA|2018-01-01T00:00:00.000Z|POINT (-75.7 45.4167) 07 719024928=719024928|||CANADIAN|CAN|100|6|1|6|1|United States|US|2018-01-01T00:00:00.000Z|POINT (-98.5795 39.828175) 08 719024929=719024929|||CANADA|CAN|190|4|1|4|4|Okanagan, British Columbia, Canada|CA|2018-01-01T00:00:00.000Z|POINT (-119.35 50.3667) 09 719024933=719024933|||POLICE||020|48|12|24|3|Wichita, Kansas, United States|US|2018-01-01T00:00:00.000Z|POINT (-97.3375 37.6922) 10 719024934=719024934|||POLICE||036|10|1|10|3|Bosque County, Texas, United States|US|2018-01-01T00:00:00.000Z|POINT (-97.6503 31.9002) Returned 669 total features Running query BBOX(geom, -120.0,30.0,-75.0,55.0) AND dtg DURING 2017-12-31T00:00:00+00:00/2018-01-02T00:00:00+00:00 Returning attributes [GLOBALEVENTID, dtg, geom] 01 719024913=719024913|2018-01-01T00:00:00.000Z|POINT (-79.7667 44.75) 02 719024918=719024918|2018-01-01T00:00:00.000Z|POINT (-75.1704 42.3442) 03 719024923=719024923|2018-01-01T00:00:00.000Z|POINT (-77.264 40.5773) 04 719024924=719024924|2018-01-01T00:00:00.000Z|POINT (-106.667 52.1333) 05 719024925=719024925|2018-01-01T00:00:00.000Z|POINT (-106.667 52.1333) 06 719024927=719024927|2018-01-01T00:00:00.000Z|POINT (-75.7 45.4167) 07 719024928=719024928|2018-01-01T00:00:00.000Z|POINT (-98.5795 39.828175) 08 719024929=719024929|2018-01-01T00:00:00.000Z|POINT (-119.35 50.3667) 09 719024933=719024933|2018-01-01T00:00:00.000Z|POINT (-97.3375 37.6922) 10 719024934=719024934|2018-01-01T00:00:00.000Z|POINT (-97.6503 31.9002) Returned 669 total features Running query EventCode = '051' 01 719024909=719024909|||MELBOURNE|AUS|051|10|1|10|4|Melbourne, Victoria, Australia|AS|2018-01-01T00:00:00.000Z|POINT (144.967 -37.8167) 02 719024963=719024963|||CITIZEN||051|6|2|6|4|City Of Sydney, New South Wales, Australia|AS|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 03 719025168=719025168|AUSTRALIAN|AUS|||051|18|1|10|4|Sydney, New South Wales, Australia|AS|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 04 719025178=719025178|AUSTRALIA|AUS|COMMUNITY||051|20|2|20|4|Sydney, New South Wales, Australia|AS|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 05 719025248=719025248|BUSINESS||||051|10|1|10|1|Australia|AS|2018-01-01T00:00:00.000Z|POINT (135 -25) 06 719025509=719025509|COMMUNITY||AUSTRALIA|AUS|051|2|1|2|1|Australia|AS|2018-01-01T00:00:00.000Z|POINT (135 -25) 07 719025555=719025555|DENMARK|DNK|||051|2|1|2|1|Australia|AS|2018-01-01T00:00:00.000Z|POINT (135 -25) 08 719025634=719025634|FIJI|FJI|||051|2|1|2|1|Fiji|FJ|2018-01-01T00:00:00.000Z|POINT (178 -18) 09 719025965=719025965|MIDWIFE||||051|10|1|10|4|Sydney, New South Wales, Australia|AS|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 10 719025036=719025036|||SENATE||051|5|1|5|2|Alabama, United States|US|2018-01-01T00:00:00.000Z|POINT (-86.8073 32.799) Returned 138 total features Running query EventCode = '051' AND dtg DURING 2017-12-31T00:00:00+00:00/2018-01-02T00:00:00+00:00 Returning attributes [GLOBALEVENTID, dtg, geom] 01 719024909=719024909|2018-01-01T00:00:00.000Z|POINT (144.967 -37.8167) 02 719024963=719024963|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 03 719025168=719025168|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 04 719025178=719025178|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 05 719025248=719025248|2018-01-01T00:00:00.000Z|POINT (135 -25) 06 719025509=719025509|2018-01-01T00:00:00.000Z|POINT (135 -25) 07 719025555=719025555|2018-01-01T00:00:00.000Z|POINT (135 -25) 08 719025634=719025634|2018-01-01T00:00:00.000Z|POINT (178 -18) 09 719025965=719025965|2018-01-01T00:00:00.000Z|POINT (151.217 -33.8833) 10 719024994=719024994|2018-01-01T00:00:00.000Z|POINT (79.25 30.25) Returned 138 total features Cleaning up test data Done Looking at the Code ------------------- The source code is meant to be accessible for this tutorial. The main logic is contained in the generic ``org.geomesa.example.quickstart.GeoMesaQuickStart`` in the ``geomesa-tutorials-common`` module, which is datastore agnostic. Some relevant methods are: - ``createDataStore`` get a datastore instance from the input configuration - ``createSchema`` create the schema in the datastore, as a pre-requisite to writing data - ``writeFeatures`` use a ``FeatureWriter`` to write features to the datastore - ``queryFeatures`` run several queries against the datastore - ``cleanup`` delete the datastore directory and dispose of the datastore instance. The quick start uses a small subset of GDELT data. Code for parsing the data into GeoTools SimpleFeatures is contained in ``org.geomesa.example.data.GDELTData``: - ``getSimpleFeatureType`` creates the ``SimpleFeatureType`` representing the data - ``getTestData`` parses an embedded TSV file to create ``SimpleFeature`` objects - ``getTestQueries`` illustrates several different query types, using CQL (GeoTools' Contextual Query Language) Visualize Data (optional) ------------------------- There are two options to visual the data ingested by this quick start. The easiest option is to use the ``export`` command of the GeoMesa FSDS tools distribution. For a more production ready example, you can alternatively stand up a GeoServer and connect it to your FSDS instance. Visualize Data With Leaflet ~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. warning:: To successfully run this command you must have a computer that is connected to the internet in order to access external leaflet resources. The ``export`` command is a part of the GeoMesa FSDS command-line tools. In order to use the command, ensure you have the command-line tools installed as described in :ref:`setting_up_fsds_commandline`. The ``export`` command provides the ``leaflet`` format which will export the features to a leaflet map that you can open in your web browser. To produce the map, run the following command from the GeoMesa FSDS tools distribution directory: .. code:: bash bin/geomesa-fs export \ --output-format leaflet \ --path /tmp/fsds/ \ --encoding parquet Where the connection parameters are the same you used above during the quickstart. To view the map simply open the url provided by the command in your web browser. If you click the menu in the upper right of the map you can enable and disable the heatmap and feature layers as well as the two provided base layers. .. figure:: _static/geomesa-quickstart-gdelt-data/leaflet-layer-preview.png :alt: Visualizing quick-start data with Leaflet Visualizing quick-start data with Leaflet Visualize Data With GeoServer ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You can use GeoServer to access and visualize the data stored in GeoMesa. In order to use GeoServer, download and install version |geoserver_version|. Then follow the instructions in :ref:`install_fsds_geoserver` to enable GeoMesa. Register the GeoMesa Store with GeoServer ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Log into GeoServer using your user and password credentials. Click "Stores" and "Add new Store". Select the ``FileSystem (GeoMesa)`` vector data source, and fill in the required parameters. Basic store info: - ``workspace`` this is dependent upon your GeoServer installation - ``data source name`` pick a sensible name, such as ``geomesa_quick_start`` - ``description`` this is strictly decorative; ``GeoMesa quick start`` Connection parameters: - these are the same parameter values that you supplied on the command line when you ran the tutorial; they describe how to connect to the FSDS location where your data reside Click "Save", and GeoServer will search your FSDS directory for any GeoMesa-managed feature types. Publish the Layer ~~~~~~~~~~~~~~~~~ GeoServer should recognize the ``gdelt-quickstart`` feature type, and should present that as a layer that can be published. Click on the "Publish" link. You will be taken to the "Edit Layer" screen. You will need to enter values for the data bounding boxes. In this case, you can click on the link to compute these values from the data. Click on the "Save" button when you are done. Take a Look ~~~~~~~~~~~ Click on the "Layer Preview" link in the left-hand gutter. If you don't see the quick-start layer on the first page of results, enter the name of the layer you just created into the search box, and press ````. Once you see your layer, click on the "OpenLayers" link, which will open a new tab. You should see a collection of red dots similar to the following image: .. figure:: _static/geomesa-quickstart-gdelt-data/geoserver-layer-preview.png :alt: Visualizing quick-start data with GeoServer Visualizing quick-start data with GeoServer Tweaking the display ~~~~~~~~~~~~~~~~~~~~ Here are just a few simple ways you can play with the visualization: - Click on one of the red points in the display, and GeoServer will report the detail records underneath the map area. - Shift-click to highlight a region within the map that you would like to zoom into. - Click on the "Toggle options toolbar" icon in the upper-left corner of the preview window. The right-hand side of the screen will include a "Filter" text box. Enter ``EventCode = '051'``, and press on the "play" icon. The display will now show only those points matching your filter criterion. This is a CQL filter, which can be constructed in various ways to query your data. You can find more information about CQL from `GeoServer's CQL tutorial `__.